m420's Syringemaking Tek
Presterilize a syringe full of
water by nuking it for 8 minutes and sucking it up in the syringe, and letting
it cool. Put a metal tray in the oven and put a glass jar in with it. Heat oven
to 400° and bake for 30 minutes. Let cool and reheat oven to 190°. Open door so
that you can slide out the rack and use the jar ontop of the metal tray (tray is
to work on). Wipe syringe needle with rubbing alcohol and flame sterilize it.
Now open the print you have and lay down next to jar. Squirt 4 ccs of water into
the jar, and scrape all the spores into the jar. Now squirt the rest of the
water into the jar going back and forth, not swirling the water. Stir for a few
seconds slowly (swirling in a circle makes all the spores stick to the jar
sides). Now slowly suck up the spore water. You should now have clean syringes
ready to inoculate.